Tutorial02 - Revision history

Osgridadmin at 09:02, 7 July 2024

2024-07-07T09:02:54Z

← Older revision		Revision as of 09:02, 7 July 2024
Line 151:		Line 151:


	As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0]		As of version 0.9.2 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and as of 0.9.3.x [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0]

	NB; (do NOT use .NET7 or 9, it WILL crash you at boot). More info on installing and compiling can be found [here https://www.osgrid.org/download.php]		NB; (do NOT use .NET7 or 9, it WILL crash you at boot). More info on installing and compiling can be found [here https://www.osgrid.org/download.php]
Line 157:		Line 157:
	Once installed,boot your simulator with command:		Once installed,boot your simulator with command:
	dotnet OpenSim.dll		dotnet OpenSim.dll



	'''Mac OS X requirements'''		'''Mac OS X requirements'''

	'''Older versions'''		'''Older versions Below 0.9.2.x'''

	~~'''Below 0.9.2.x'''~~ You~~'ll~~ need to have Mono to run OpenSim. This can be found at http://www.mono-project.com/download/		You will need to have Mono installed to run OpenSim. This can be found at http://www.mono-project.com/download/

	Download the Mono release for Mac you wish to use		Download the Mono release for Mac you wish to use. Run the .pkg file and accept the terms of the license. Mono will install.
	Run the .pkg file and accept the terms of the license. Mono will install.

	Start the simulator with		Start the simulator with
Line 172:		Line 172:


	'''Above version 0.9.3.x''' ~~you~~ will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0].		'''Above version 0.9.3.x'''

			You will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0].

Osgridadmin at 09:00, 7 July 2024

2024-07-07T09:00:27Z

← Older revision		Revision as of 09:00, 7 July 2024
Line 163:		Line 163:
	'''Older versions'''		'''Older versions'''

	Below 0.9.2.x You'll need to have Mono to run OpenSim. This can be found at http://www.mono-project.com/download/		'''Below 0.9.2.x''' You'll need to have Mono to run OpenSim. This can be found at http://www.mono-project.com/download/

	Download the Mono release for Mac you wish to use		Download the Mono release for Mac you wish to use
Line 171:		Line 171:
	mono -opensim.exe		mono -opensim.exe

	Above version 0.9.3.x you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0].
			'''Above version 0.9.3.x''' you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0].

Osgridadmin at 08:44, 7 July 2024

2024-07-07T08:44:42Z

← Older revision		Revision as of 08:44, 7 July 2024
Line 153:		Line 153:
	As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0]		As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0]

	NB(do NOT use 7 or 9, it WILL crash you at boot ). More info on installing and compiling can be found [here https://www.osgrid.org/download.php]		NB; (do NOT use .NET7 or 9, it WILL crash you at boot). More info on installing and compiling can be found [here https://www.osgrid.org/download.php]

	Once installed,boot your simulator with command:		Once installed,boot your simulator with command:

Osgridadmin at 08:43, 7 July 2024

2024-07-07T08:43:52Z

← Older revision		Revision as of 08:43, 7 July 2024
Line 156:		Line 156:

	Once installed,boot your simulator with command:		Once installed,boot your simulator with command:
	dotnet OpenSim.dll		dotnet OpenSim.dll

Osgridadmin at 08:31, 7 July 2024

2024-07-07T08:31:42Z

← Older revision		Revision as of 08:31, 7 July 2024
Line 140:		Line 140:

	'''Older versions'''		'''Older versions'''
	Up to version 0.9.2 you will need to have Mono installed to run OpenSim. This is often available via the package manager. If you need to build a specific version you will need to do it manually~~. Here is a tutorial:~~ http://~~nebadon2025~~.~~com~~/~~opensim~~/~~viewtopic~~.~~php?f=7&t=44~~		Up to version 0.9.2 you will need to have Mono installed to run OpenSim. This is often available via the package manager. If you need to build a specific version you will need to do it manually, and will have to refer to the [opensim wiki http://opensimulator.org/wiki/Build_Instructions].

	for debian/ubuntu		for debian/ubuntu

Osgridadmin at 08:24, 7 July 2024

2024-07-07T08:24:32Z

← Older revision		Revision as of 08:24, 7 July 2024
Line 147:		Line 147:
	zypper install mono-complete		zypper install mono-complete

	Start the simulator with mono -opensim.exe		Start the simulator with
			mono -opensim.exe


	As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0] (do NOT use 7 or 9, it WILL crash you at boot ).		As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0]
	More info on installing and compiling can be found [here https://www.osgrid.org/download.php]
			NB(do NOT use 7 or 9, it WILL crash you at boot ). More info on installing and compiling can be found [here https://www.osgrid.org/download.php]

	Once installed,boot your simulator with command:		Once installed,boot your simulator with command:
Line 160:		Line 162:

	'''Older versions'''		'''Older versions'''

	Below 0.9.2.x You'll need to have Mono to run OpenSim. This can be found at http://www.mono-project.com/download/		Below 0.9.2.x You'll need to have Mono to run OpenSim. This can be found at http://www.mono-project.com/download/

	Download the Mono release for Mac you wish to use		Download the Mono release for Mac you wish to use
	Run the .pkg file and accept the terms of the license. Mono will install.		Run the .pkg file and accept the terms of the license. Mono will install.
	Start the simulator with mono -opensim.exe
			Start the simulator with
			mono -opensim.exe

	Above version 0.9.3.x you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0].		Above version 0.9.3.x you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0].


	Once installed,boot your simulator with command:		Once installed,boot your simulator with command:
	dotnet OpenSim.dll		dotnet OpenSim.dll

	----------		----------
	*- < [[Tutorial01\|Previous]] : [[Tutorial03\|Next]] >		*- < [[Tutorial01\|Previous]] : [[Tutorial03\|Next]] >
	---------		---------

Osgridadmin at 08:21, 7 July 2024

2024-07-07T08:21:15Z

← Older revision		Revision as of 08:21, 7 July 2024
Line 150:		Line 150:


	As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0] (do NOT use 7 or , it WILL crash you at boot ).		As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0] (do NOT use 7 or 9, it WILL crash you at boot ).
	More info on installing and compiling can be found [here https://www.osgrid.org/download.php]		More info on installing and compiling can be found [here https://www.osgrid.org/download.php]

Osgridadmin at 08:20, 7 July 2024

2024-07-07T08:20:33Z

← Older revision		Revision as of 08:20, 7 July 2024
Line 139:		Line 139:
	'''Linux requirements'''		'''Linux requirements'''

			'''Older versions'''
	Up to version 0.9.2 you will need to have Mono installed to run OpenSim. This is often available via the package manager. If you need to build a specific version you will need to do it manually. Here is a tutorial: http://nebadon2025.com/opensim/viewtopic.php?f=7&t=44		Up to version 0.9.2 you will need to have Mono installed to run OpenSim. This is often available via the package manager. If you need to build a specific version you will need to do it manually. Here is a tutorial: http://nebadon2025.com/opensim/viewtopic.php?f=7&t=44

Line 145:		Line 146:
	for opensuse		for opensuse
	zypper install mono-complete		zypper install mono-complete

			Start the simulator with mono -opensim.exe


	As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0] (do NOT use 7 or , it WILL crash you at boot ).		As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0] (do NOT use 7 or , it WILL crash you at boot ).
Line 155:		Line 159:
	'''Mac OS X requirements'''		'''Mac OS X requirements'''

	Below 0./9.2 You'll need to have Mono to run OpenSim. This can be found at http://www.mono-project.com/download/		'''Older versions'''
			Below 0.9.2.x You'll need to have Mono to run OpenSim. This can be found at http://www.mono-project.com/download/

	Download the Mono release for Mac you wish to use		Download the Mono release for Mac you wish to use
	Run the .pkg file and accept the terms of the license. Mono will install.		Run the .pkg file and accept the terms of the license. Mono will install.
	Above version 0.9.3 you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0].		Start the simulator with mono -opensim.exe

			Above version 0.9.3.x you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0].

			Once installed,boot your simulator with command:
			dotnet OpenSim.dll

	----------		----------
	*- < [[Tutorial01\|Previous]] : [[Tutorial03\|Next]] >		*- < [[Tutorial01\|Previous]] : [[Tutorial03\|Next]] >
	---------		---------

Osgridadmin at 08:17, 7 July 2024

2024-07-07T08:17:27Z

← Older revision		Revision as of 08:17, 7 July 2024
Line 32:		Line 32:
	Where possible, we prefer wired connections over any wireless, as this might have limitations.		Where possible, we prefer wired connections over any wireless, as this might have limitations.

	Opensimulator is a "native .NET framework application. So make sure your computer is up to date, and has all relevant versions of .NET framework (~~3.5~~ and ~~4.7~~) installed. (Your X:\windows\microsoft.NET\framework folder will show which version(s) you have installed).		Opensimulator is a "native .NET framework application. So make sure your computer is up to date, and has all relevant versions of .NET framework (6 and 8) installed. (Your X:\windows\microsoft.NET\framework folder will show which version(s) you have installed). If you plan to run your simulators on a linux distro or a Mac, the same applies. .NET 6 and 8 are mandatory to run the latest 0.9.3.x versions.
	If you plan to run your ~~sims~~ on a linux distro ~~(which has no .NET framework)~~, ~~use Mono (app get-mono-complete)~~. ~~You will need at least mono 5~~.12 to ~~be able to use~~ the ~~current version (~~0.9.x)

	Also mind OpenSim will run on really crappy hardware, but very poorly. A dual core processor, and 2 GB of RAM is a minimum. Especially if you plan to also run a viewer on the same machine. More CPU cores, RAM & bandwidth is better. Much more, is much better.		Also mind OpenSim will run on really crappy hardware, but very poorly. A dual core processor, and 4 GB of RAM is really a bare minimum these days. Especially if you plan to also run a viewer on the same machine. More CPU cores, RAM & bandwidth is better. Much more, is much better.

	'''The Howto'''		'''The Howto'''
Line 147:		Line 146:
	zypper install mono-complete		zypper install mono-complete

	As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] (do NOT use 7 or , it WILL crash you at boot ).		As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0] (do NOT use 7 or , it WILL crash you at boot ).
			More info on installing and compiling can be found [here https://www.osgrid.org/download.php]

	Once installed,boot your simulator with command:		Once installed,boot your simulator with command:
	dotnet OpenSim.dll		dotnet OpenSim.dll
Line 154:		Line 155:
	'''Mac OS X requirements'''		'''Mac OS X requirements'''

	You'll need to have Mono to run OpenSim. This can be found at http://www.mono-project.com/download/		Below 0./9.2 You'll need to have Mono to run OpenSim. This can be found at http://www.mono-project.com/download/

	Download the Mono release for Mac you wish to use		Download the Mono release for Mac you wish to use
	Run the .pkg file and accept the terms of the license. Mono will install.		Run the .pkg file and accept the terms of the license. Mono will install.
			Above version 0.9.3 you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] and [.NET 8 https://dotnet.microsoft.com/en-us/download/dotnet/8.0].

	----------		----------
	*- < [[Tutorial01\|Previous]] : [[Tutorial03\|Next]] >		*- < [[Tutorial01\|Previous]] : [[Tutorial03\|Next]] >
	---------		---------

Osgridadmin at 16:50, 25 March 2024

2024-03-25T16:50:52Z

← Older revision		Revision as of 16:50, 25 March 2024
Line 140:		Line 140:
	'''Linux requirements'''		'''Linux requirements'''

	~~You~~ will need to have Mono installed to run OpenSim. This is often available via the package manager. If you need to build a specific version you will need to do it manually. Here is a tutorial: http://nebadon2025.com/opensim/viewtopic.php?f=7&t=44		Up to version 0.9.2 you will need to have Mono installed to run OpenSim. This is often available via the package manager. If you need to build a specific version you will need to do it manually. Here is a tutorial: http://nebadon2025.com/opensim/viewtopic.php?f=7&t=44

	for debian/ubuntu		for debian/ubuntu
Line 146:		Line 146:
	for opensuse		for opensuse
	zypper install mono-complete		zypper install mono-complete

			As of version 0.9.3 and up, you will need [.NET 6 https://dotnet.microsoft.com/en-us/download/dotnet/6.0] (do NOT use 7 or , it WILL crash you at boot ).
			Once installed,boot your simulator with command:
			dotnet OpenSim.dll