LlGetPrimitiveParams
{{#if:
{{#vardefine:p_type_flag_desc|PRIM_TYPE_* flag}} {{#vardefine:p_type_parameters_desc|a list consisting of the parameters of flag}} {{#vardefine:p_type_parameters_hover|a list consisting of the parameters of the PRIM_TYPE_* flag}}
{{#vardefine:p_hole_shape_desc|PRIM_HOLE_* flag}} {{#vardefine:p_cut_desc|x and y range from 0.0 to 1.0, x must be at least 0.05 smaller than y (z is ignored)}} {{#vardefine:p_hollow_desc|ranges from 0.0 (solid) to 0.95 (maximum hollowed)}} {{#vardefine:p_twist_box_desc|ranges from -0.5 (-180 degree in the edit window) to 0.5 (+180 degree in the edit window) for both x and y (z is ignored)}} {{#vardefine:p_twist_torus_desc|ranges from -1.0 (-360 degree in the edit window) to 1.0 (+360 degree in the edit window) for both x and y (z is ignored)}} {{#vardefine:p_hole_size_desc|x ranges from 0.05 to 1.0; y ranges from 0.05 (large hole) to 0.50 (no hole)}} {{#vardefine:p_top_size_hover|ranges from 0.0 to 1.0 for both x and y (z is ignored); see Caveats about the differences between the client and scripting range for this value}} {{#vardefine:p_top_size_desc|ranges from 0.0 to 1.0 for both x and y (z is ignored)!}} {{#vardefine:p_z_taper_hover|ranges from 0.0 to 2.0 for both x and y (z is ignored); see Caveats about the differences between the client and scripting range for this value}} {{#vardefine:p_z_taper_desc|ranges from 0.0 to 2.0 for both x and y (z is ignored)!}} {{#vardefine:p_top_shear_desc|ranges from -0.5 to 0.5 for both x and y (z is ignored)}} {{#vardefine:p_taper_desc|ranges from -1.0 to 1.0 for both x and y (z is ignored)}} {{#vardefine:p_revolutions_desc|ranges from 1.0 to 4.00}} {{#vardefine:p_radius_offset_desc|depends on holesize.y and revolutions}} {{#vardefine:p_skew_desc|ranges from -1.0 to 1.0}}
{{#vardefine:p_twist_end_desc|ranges from -0.5 (-180 degree in the edit window) to 0.5 (+180 degree in the edit window)}} {{#vardefine:p_hole_size_y_desc|ranges from 0.05 (large hole) to 0.50 (no hole)}} {{#vardefine:p_topshear_x_desc|ranges from 0.05 to 0.50}}
{{#vardefine:type_const|Template:LSL Const}}
}}{{#if: