View source for LlGetPrimitiveParams

<onlyinclude>{{#if:

{{#vardefine:p_type_flag_desc|PRIM_TYPE_* flag}}
{{#vardefine:p_type_parameters_desc|a list consisting of the parameters of '''flag'''}}
{{#vardefine:p_type_parameters_hover|a list consisting of the parameters of the PRIM_TYPE_* flag}}

{{#vardefine:p_hole_shape_desc|PRIM_HOLE_* flag}}
{{#vardefine:p_cut_desc|x and y range from 0.0 to 1.0, x must be at least 0.05 smaller than y (z is ignored)}}
{{#vardefine:p_hollow_desc|ranges from 0.0 (solid) to 0.95 (maximum hollowed)}}
{{#vardefine:p_twist_box_desc|ranges from -0.5 (-180 degree in the edit window) to 0.5 (+180 degree in the edit window) for both x and y (z is ignored)}}
{{#vardefine:p_twist_torus_desc|ranges from -1.0 (-360 degree in the edit window) to 1.0 (+360 degree in the edit window) for both x and y (z is ignored)}}
{{#vardefine:p_hole_size_desc|x ranges from 0.05 to 1.0; y ranges from 0.05 (large hole) to 0.50 (no hole)}}
{{#vardefine:p_top_size_hover|ranges from 0.0 to 1.0 for both x and y (z is ignored); see Caveats about the differences between the client and scripting range for this value}}
{{#vardefine:p_top_size_desc|ranges from 0.0 to 1.0 for both x and y (z is ignored)[[#z_taper|<span style="color:red;" title="The values for in the client and scripting are different!">!</span>]]}}
{{#vardefine:p_z_taper_hover|ranges from 0.0 to 2.0 for both x and y (z is ignored); see Caveats about the differences between the client and scripting range for this value}}
{{#vardefine:p_z_taper_desc|ranges from 0.0 to 2.0 for both x and y (z is ignored)[[#z_taper|<span style="color:red;" title="The values for in the client and scripting are different!">!</span>]]}}
{{#vardefine:p_top_shear_desc|ranges from -0.5 to 0.5 for both x and y (z is ignored)}}
{{#vardefine:p_taper_desc|ranges from -1.0 to 1.0 for both x and y (z is ignored)}}
{{#vardefine:p_revolutions_desc|ranges from 1.0 to 4.00}}
{{#vardefine:p_radius_offset_desc|depends on holesize.y and revolutions}}
{{#vardefine:p_skew_desc|ranges from -1.0 to 1.0}}

<!-- The old PRIM_TYPE (PRIM_TYPE_LEGACY) variables -->
{{#vardefine:p_twist_end_desc|ranges from -0.5 (-180 degree in the edit window) to 0.5 (+180 degree in the edit window)}}
{{#vardefine:p_hole_size_y_desc|ranges from 0.05 (large hole) to 0.50 (no hole)}}
{{#vardefine:p_topshear_x_desc|ranges from 0.05 to 0.50}}

{{#vardefine:type_const|{{LSL Const|PRIM_TYPE|integer|9|c=Used to {{GetSet|{{{1|}}}|get|set|/}} the the type of prim.}}}}

}}</onlyinclude>{{#if:

{{:PRIM_TYPE_SCULPT}}

}}{{LSL Constant
|name=PRIM_TYPE
|type=integer
|value=9
|desc=Gets or sets the type of the prim
|examples
|pa={{LSL Constant/List|i_front=[&#32;{{#var:type_const}},&#32;|i_end=&nbsp;]&nbsp;+ {{LSL Param|type_parameters|flag_parameters}}
|text=Used with [[llSetPrimitiveParams]] & [[llSetLinkPrimitiveParams]].

The values needed for '''flag_parameters''' is dependent on '''flag''', please refer to the individual PRIM_TYPE_* articles for additional information.

|toc=llSetPrimitiveParams
|i1_type=integer|i1_name=type_flag|i1_disp=flag
}}
|pb={{LSL Constant/List|i_front=[[llGetPrimitiveParams]]([&nbsp;{{#var:type_const}}|i_end=&nbsp;]);|
|r_front=Returns the list [&nbsp;|r_end=&nbsp;] + {{LSL Param|type_parameters|flag_parameters}}
|text=The values that follow after '''flag''', the '''flag_parameters''', are dependent on the value of '''flag''', please refer to the individual PRIM_TYPE_* articles for further information.

|toc=llGetPrimitiveParams
|r1_type=integer|r1_name=type_flag|r1_disp=flag
}}
|pc=
{{LSL_Constants/PrimitiveParams/type|table=*|style=margin-top:0;margin-right:0;|simple=*|sortable=*|{{LSL Param|type_parameters|flag_parameters}}}}
|constants=
{{LSL ConstRow|CHANGED_SHAPE}}
|functions=
{{LSL DefineRow||[[llSetPrimitiveParams]]|}}
{{LSL DefineRow||[[llSetLinkPrimitiveParams]]|}}
{{LSL DefineRow||[[llGetPrimitiveParams]]|}}
|events=
{{LSL DefineRow||[[changed]]|}}
|location
|cat1=Prim
|cat2
|cat3
|cat4
}}